Maker, developers and hobbyists that enjoy building Arduino platform based projects might be interested in a new Arduino Motor Shield called the Arc controller which has been created by Arc Robotics.

Brushless motors are ubiquitous in RC applications and robotics, but are usually driven with low-cost motor controllers that have to be controlled with RC-style PWM signals and don’t allow for much ...

This project implements a joystick controlled robot using an Arduino Mega 2560. The robot has two DC motors with encoders, and a joystick to control its speed and direction. The speed of the motors is ...

This is a shield for an Arduino Mega or Giga that can be used to control a robot car (for example) and has inputs for additional sensors. The inspiration for this project stems from my interest in ...

The table shows the pin configuration of the Arduino UNO–based robotic arm. The red (VCC) wires of all servos are connected ...

Electronic speed controller with arduino project illustrate a physical 3-phase motor driver system. It features high current MOSFETS, dual MOSFET drivers, and an arduino nano. A DIY motor driver board ...

本手順はWindowsにPoke-Controller with Arduino Leonardo を導入する手順です Poke-Controller-Modified/Poke-Controller-Modified-Extensionの導入 下記 ...

ClearCore CLCR-4-13 is an industrial IO and motion controller that can be programmed using the Arduino IDE. It handles up to four axes of step-and-direction motion ...

⇒ UART Configuration : One of the most powerful aspects of the TMC2209 is its single-wire UART interface. With UART, you can configure motor current, microstepping resolution, operating modes, and ...

grbl is stepper motor controller firmware for three-axis cnc machines, intended to run on Arduinos with a motor driver add-on board. Engineer in Wonderland cnc-related blogs are indexed here It is the ...