The TSL25911 sensor module has a total of 5 pins. Two power pins, one interrupt pin, and two I2C pins. The pinout of the module is as follows: VCC - Provides power for the module, Connect to the 5V ...

This project demonstrates how to use an Arduino Uno with a light sensor to control an LED based on the ambient light intensity. When the ambient light level exceeds a certain threshold, the LED turns ...

Now we can stepped into the light with our favorite microcontroller Arduino! Since a vast number of analog/digital ambient light sensors/light sensor modules are now available at reasonable price, ...

In this experiment we are going to work with a sensor which is a resistor that depends on light. In a dark environment, the resistor will have a very high resistance. As photons (light) land on the ...

V-LED This is the VCC pin of the LED. Connect this pin to the 5V pin of the Arduino with a 150Ω Current Limiting Resistor. LED-GND This is the Ground Pin of the LED. Connect this pin to the Ground pin ...

This sensor is built for detecting ppm of certain gas molecules, such as VOC, ethanol, ammonia, Hydrogen sulphide, etc. This sensor can't distinguish different gas molecules. Please use the table ...

This Arduino-based night security light can protect your home/office from thieves/intruders at night. The light glows when movement is detected in front of the PIR sensor. Simultaneously, a piezo ...

This research is aimed to explore the efficacy and comparison of low-cost light sensor measurements for agricultural applications. For this reason, TSL2561, BH1750, and TEMT6000, low-cost light ...